Diesel Tuner's Blog

How Tractors Measure EGT's?

[fa icon="calendar'] Mar 27, 2017 2:24:00 PM / by Paul Wilson posted in john deere, case, new holland, Tuner for Combine, case ih, tractor tuner, combine tuner, tractor tuning, combine tuning, tractor, Combine, Tuner for tractor, Tuner for John Deere, Tuner for Case, EGT, High EGT's

[fa icon="comment"] 0 Comments

 


How Tractors Measure Exhaust Gas Temperatures

Have you ever noticed that some OEM's do not install an EGT (exhaust gas temperature) probe on the manifold?  Any performance diesel gear head will tell you it's the best place to measure EGT's giving you the  most accurate insight to any immediate stress on the motor.  

Spiking EGT's in the manifold could be a symptom of many different problems including low boost, failing injectors, airflow restriction, EGR failure, etc.  All of these failures signify a lit fuse that ultimately ends in engine failure if left unchecked.  Clearly it's important to monitor EGT's, right!?  

The problem with installing a probe from the manufacturer stand point is the life expectancy of the probe.  Seeing extreme temperatures and still measuring accurately for the life of the service life requires high quality probes (read: expensive).  

Never fear, manufacturers have come a long way in measuring temperatures (and cutting costs).  In fact many feel no real need for a probe favoring a dynamic EGT model instead.

 READ THE 5 MOST COMMON QUESTIONS ABOUT TRACTOR TUNING

 

Read More [fa icon="long-arrow-right"]

Do you have enough power for Tillage Work?

[fa icon="calendar'] Mar 17, 2017 10:08:12 AM / by Paul Wilson posted in john deere, case, new holland, Tuner for Combine, Tuner for Sprayer, case ih, tractor tuner, combine tuner, tractor tuning, Tuner for Versatile, tractor, Tuner for tractor, Tuner for John Deere, Tuner for Case, tillage, deep ripping, chisel plow

[fa icon="comment"] 0 Comments


 

 

 

Tillage and Deep Ripping is Laborsome and Expensive Work! 

 

Annual tillage can help mix nutrients in the soil, combat compacted soil, conserve soil moisture, and help in other ways.  Many of us throughout the corn belt have to do heavy tillage work (deep ripping, chisel plowing, etc.).  

For you, tillage work represents the  the hardest job your tractor will see this year.   Afterall, the ripper is probably the biggest implement you will run.  Which explains why so many reports come in about tractors being grossly under powered for this practice.  Bogging down on headlands, running slow up gentle grades, being forced to raise the plow to keep from getting stuck, and generally not being able to run at target ground speed to get a consistant finish are complaints we commonly hear from farmers doing this work.  

We see the stress and heavy power demands of tillage work as the biggest opportunity for savings.  Below we'll outline the case for tuning the tractor to save fuel during tillage operation.  We'll also save you from having to make significant capital investment in higher horsepower equipment to pull larger plows and finishers.

Power Manager

  • Custom tractor tuning
  • Safe for your tractor
  • Easy to use and readily available
  • Use less fuel per acre
  • Cover more acres per hour
  • Supports Green, Red and Blue tractors

How Much HP Can Custom Tuning Add To My Tractor?

Read More [fa icon="long-arrow-right"]

Does your tractor have enough power for Tillage Work?

[fa icon="calendar'] Oct 17, 2016 1:39:59 PM / by Paul Wilson posted in john deere, case, new holland, Tuner for Combine, Tuner for Sprayer, case ih, tractor tuner, combine tuner, tractor tuning, Tuner for Versatile, tractor, Tuner for tractor, Tuner for John Deere, Tuner for Case, tillage, deep ripping, chisel plow

[fa icon="comment"] 0 Comments


 

 

Tillage work is labor some and has high fuel cost! 

 

Annual tillage can help mix nutrients in the soil, combat compacted soil, conserve soil moisture, and help in other ways.  A common problem with the farming community throughout the corn belt, is heavy tillage work (deep ripping, chisel plowing, etc.) can be a chore for their tractor. 

Tillage work involves using your tractor to pull what is generally the largest implement you own.  Most people report that tillage work is when a tractor will be put under the highest amount of stress.  Which explains why so many reports come in about tractors being grossly under powered for this practice.  Bogging down, running slow, struggling to climb hills, and other complaints are often made during tillage work.  

This is a situation that can be easily remedied with the custom tractor tuning provided by our Power Manager! 

Power Manager

  • Custom tractor tuning
  • Safe for your tractor
  • Easy to use and readily available
  • Use less fuel per acre
  • Cover more acres per hour
  • Supports Green, Red and Blue tractors

How Much HP Can Custom Tuning Add To My Tractor?

Read More [fa icon="long-arrow-right"]

3 Reasons Farmers Love Combine Tuning

[fa icon="calendar'] Oct 10, 2016 3:13:17 PM / by Paul Wilson posted in Mods, What should i do first, Emissions, What can I do to get better fuel mileage?, john deere, Power, Emisssions Intact Tuning, case, new holland, case ih, tractor tuner, combine tuner, tractor tuning, combine tuning, Making horse power with, Tuner for Versatile, Harvest, tractor, versatile, Combine, Tuner for John Deere, Tuner for Case

[fa icon="comment"] 0 Comments


 

Harvest is one of the busiest times of year for farmers.  One thing no farmer should have to deal with during this time is an under powered combine.  Lugging up hills, slowing down the system, and in general costing the operation money can be enough to drive you nuts!  

Each year, just after harvest, we take an influx of calls inquiring about adding horsepower to combines.  Farmers tend to be detail orientated, and have a lot of questions before tuning any equipment.  Which is totally understandable, combines are not exactly cheap and they are one of the most crucial components of a successful harvest. 

 

If you think tuning a combine is crazy, take a look at the 3 most common reasons we find farmers love combine tuning.  


Read More [fa icon="long-arrow-right"]

Shift Up, Throttle Back Review

[fa icon="calendar'] Aug 15, 2016 2:39:06 PM / by Paul Wilson posted in Emissions, john deere, Add blue, DPF Intact, DPF ON, New Diesel, Power, case, new holland, Tuner for Combine, Tuner for Sprayer, case ih, tractor tuner, combine tuner, Tuner for Versatile, Urea, Harvest, tractor, versatile, Combine, Tuner for tractor, Tuner for John Deere, Tuner for Case

[fa icon="comment"] 0 Comments


Shift Up, Throttle Back, What is it?

Many farmers run their large 4WD tractors while performing tillage work. Generally they find a gear that lets them achieve a desired ground speed and run at WOT. This practice will get the job done, no question. However, operators may see the Gallons Per Hour go up while this work is performed. This is a result of the tractor running more RPM than neccessary for the drawbar requirement. The amount of power needed for most drabar activities is probably not the peak power output of the tractor. This excessive RPM operation is the root cause of wasted fuel.  Good news though: Iowa State University, University Extension studied the "Shift Up, Throttle Back" strategy and have given suggestions on how to save fuel.  In fact, during testing some tractors measured up to a 20% reduction in fuel useage.

 

Read More [fa icon="long-arrow-right"]

5 Reasons to tune your combine before harvest

[fa icon="calendar'] Jun 24, 2016 8:30:00 AM / by Paul Wilson posted in Mods, What should i do first, Emissions, What can I do to get better fuel mileage?, john deere, Power, Emisssions Intact Tuning, case, new holland, case ih, tractor tuner, combine tuner, tractor tuning, combine tuning, Making horse power with, Tuner for Versatile, Harvest, tractor, versatile, Combine, Tuner for John Deere, Tuner for Case

[fa icon="comment"] 0 Comments


Harvest is one of the busiest times of year for farmers. Trying to get the crop in before the weather turns, managing employees and rushing to get a myriad of tasks done can be daunting. One thing no farmer should have to deal with during this busy time is an under performing combine. Lugging up hills, slowing down the system, and in general costing the operation money.  This does not have to be the situation for you this fall!

Each year, just after harvest, we take an influx of calls inquiring about adding horsepower to combines. Farmers tend to be detail orientated, and have a lot of questions before tuning any equipment. Which is totally understandable, combines are not exactly cheap and they are one of the most crucial components of a successful harvest. 

A few questions come up in every conversation about tuning a combine. Below, I hope to provide answers to the most common questions about combine tuning. 

Read More [fa icon="long-arrow-right"]

How to save fuel on the farm!

[fa icon="calendar'] May 28, 2016 5:00:00 AM / by Paul Wilson posted in john deere, case, new holland, Tuner for Combine, case ih, tractor tuner, combine tuner, combine tuning, Emissions Intact, tractor, versatile, Tuner for tractor, Tuner for John Deere, Tuner for Case

[fa icon="comment"] 0 Comments


Small farmers have a tough time making their passion profitable. Varying market prices, harsh weather conditions and rising cost of goods can become a true strain on the farm. 

Since the beginning of agriculture farmers have been finding ways to cut cost and increase production. This concept is what has driven innovation on the farm. However, with as many advances and "life hacks" that have been established, the cost of fuel is ever rising. Even with today's high tech, computer controlled equipment, the cost of fuel can still be staggering. 

Some other great articles about tractor fuel consumption:

BEFORE diving into saving fuel, you will want to gather as much detail as you can about how much fuel is currently costing you. This means knowing more than just how much you spend on fuel each year, quarter, or month, but knowing how much fuel each tractor uses for each task. To download a tracker that will help you narrow in on your most costly activities check out the Performance Tracker below.

 GET THE Agricultural Equipment Performance Tracker

Read More [fa icon="long-arrow-right"]

Can Your Tractor Ever Really Have Enough Power?

[fa icon="calendar'] May 20, 2016 12:50:01 PM / by Paul Wilson posted in john deere, case, new holland, Tuner for Combine, Tuner for Sprayer, case ih, tractor tuner, combine tuner, tractor tuning, Tuner for Versatile, tractor, Tuner for tractor, Tuner for John Deere, Tuner for Case

[fa icon="comment"] 0 Comments


Custom Tuning for Tractors!

Read More [fa icon="long-arrow-right"]

How to run a larger implement on your tractor that is under-powered.

[fa icon="calendar'] Apr 26, 2016 10:00:00 AM / by Paul Wilson posted in john deere, case, new holland, case ih, tractor tuner, combine tuner, tractor tuning, combine tuning, tractor, versatile

[fa icon="comment"] 0 Comments

  • Have you considered a Bigger planter or tillage tool on your Farm. Are you worried if your tractor will have enough horsepower to get the job done?

 

 

 

If your existing machine has enough tire, but bogs under heavy load- consider tuning your tractor. You can use factory style calibration software to safely up-rate machines lower in their series to power levels of those tractors higher in the series. This means that if our brand has a similar size machine with more power than yours, you can get you the power difference.

Up-rate a 6105R to a 6130R

Up-rate a 9410R to a 9510R

Up-rate a Steiger 540 to a Steiger 620

Up-rate a 8245R to an 8295R etc.

Read More [fa icon="long-arrow-right"]

Subscribe to Email Updates

Lists by Topic

see all

Posts by Topic

see all

Recent Posts