Diesel Tuner's Blog

The 3.0L Duramax is a wildly capable inline 6-cylinder diesel engine designed for full-size half-ton pickup trucks and SUVs. Due to its amazing power-to-weight ratio and towing performance, GM has chosen to offer this engine in everything from Chevy Silverado 1500 to the Chevy Suburban and even the Cadillac Escalade. Clearly, GM is confident in its new design. 

The new 3.0L Duramax shares very little in common with its predecessor the 4-cylinder 2.8L Duramax. It's been completely redesigned from the ground up and features many improvements such as a forged crankshaft, forged steel connecting rods, and a much stronger block design. The result is an engine that can produce 277 hp and 460 ft-lbs. of torque. Which is comparable torque to that of the more expensive 6.2L gas engine that is offered in most of the same vehicles that the 3.0L is offered in. 

Get your truck the horsepower you need:

It's summer time and that means trucks are out sled pulling, towing, and getting worked! It also means you are more likely to be considering your trucks next upgrade (or repair).  

For the diesel owner who wrenches on his own truck the cost per horsepower is lower and his acceptable margin of error is inevitably higher.  In other words, it's cheaper but if something goes wrong there is only yourself to blame.  Many enthusiast thrive on this and only trust themselves or a few select others to  work on their truck.  The reality is however, that many diesel power fanatics don't have the time or skill level to tackle the bigger jobs - They just want to drive them!   Read on to see what things to consider in selecting a shop to do work on your truck.  

Here are some examples of truck builds we have done in the past:

• ApacheMax
• Scottsdale Duramax
• 733HP LML Emissions Equipped

REGEN is the burning of soot built up in a DPF. 

 The Emissions Equipment for diesel trucks has changed quite a bit through out the years. In 2004.5 all heavy duty diesel pickups had to install EGR's which is the exhaust gas recirculation system. Basically it turns exhaust into inert gas and directs the gas back into the combustion process. Then in 2007.5 the EPA required pickups to use a DPF. The DPF, or Diesel Particulate Filter, is a filter that catches soot, or unburnt fuel from the exhaust. Once the soot builds up, the exhaust heats up to burn the soot off. Starting in 2011 Diesel Exhaust Fluid is used to treat NOx emissions, in addition to the EGR and DPF treating the carbon emissions. 

The DPF is a crucile part of treating diesel emissions and each OEM utilizes and operates their DPF a little differently. Below, the DPF in the 2011-2016 LML Duramax is explained.

 CHECK OUT THESE OTHER LINKS ABOUT REGEN AND DPF's

• Duramax Thread about Regen Data
• DieselNet Tech Guide to DPF
• How Diesel Particulate Filters Work (JLM Lubricants)

Did you know there is no reason to delete the emissions from your 2011-2016 Duramax? 

DuramaxTuner.com's SPADE is capable of adding up to 135HP to your EMISSIONS INTACT LML. 

Actually, more and more people are tuning their 2011 + Duramax (LML) with the emissions equipment intact.  This is a great option for Duramax owners that would like a nice, quiet, reliable, efficient truck that performs well every time. However, many LML Owners have some basic questions prior to pursining emissions intact tuning. 

3 SIMPLE THINGS YOU CAN DO TO HELP KEEP YOUR LML DURAMAX RELIABLE:

Your truck is generally one of the largest investments you will make, so keeping it on the road is priority number 1!

The LML Duramax is one of the best trucks GM has ever produced. With 397 Horse Power and 796 ft/lbs of torque from the factory, the truck has the power plant necessary to do just about any job you can throw at it. However, despite the massive improvements the LML has brought to the table, there are some all too common pitfalls that can make this beast a burden. 

Here are some other places you can read more about the LML Duramax:

• LML Duramax SPADE
• Truck Trend Review of LML Duramax

• The LLY Duramax  is a great truck from the factory for there are 3 modifications every owner should make! The LLY was manufactured 2004.5 and 2005. There are a few 2006 models that are labeled as an LLY, however they have all of the LBZ upgrades from the factory, so for performance applications consider those an LBZ. An LLY was the first Duramax with the injectors outside of the heads, a variable vane turbo and a 50 state EGR.