Diesel Tuner's Blog

2011-2016 Ford Diesel Dead Pedal

Many customers have upgraded from their old pre-emissions Powerstroke to a new Ford 6.7L and found there are a few changes besides just the looks. 

The2011-2014 F250 and other diesel models made and astonishing 400 RWHP and 800 ft/lbs while the 2015/2016 Powerstroke makes 440 RWHP and 860 ft/lbs of torque. Which is impressive by itself but you will probably notice your old Ford diesel feels quicker.  In fact we hear many stories of guys trying to merge into traffic or gun it to get in front of someone and the pedal does not seem to respond.  This phenomena is often called the Ford 6.7L "Dead Pedal".  The "Dead Pedal" is a delay the driver feels between pressing on the throttle pedal and the truck reacting as desired. 

But what causes the Ford Diesel Dead Pedal?  And more importantly, What is the fix for it?

These are exactly the questions we hope to answer for you. Below you will see what we have put together on the topic. 

• LISTEN TO THE DIESEL PERFORMANCE PODCAST ON CUSTOM FOR TUNING
• READ ABOUT CUSTOM TUNING FOR THE 6.7L POWERSTROKE 
• WATCH A VIDEO ABOUT CUSTOM FORD TUNING

Drop-In Duramax Turbo Options

In the old days, there was no such thing as a "drop-in" turbo.  You pretty much had to buy a turbo that was designed for a different application and convert it to run on your Duramax.  Meaning the requirements for installation included several custom fabricated pieces to make it work.  

As technology in the diesel performance industry has advanced, our options for parts have expanded.  No longer do we have to use semi turbo's and roal coal to make power.  Now with the common rail injection system and variable vane turbo advancements there is a real need to find a turbo that makes more power than stock, while retaining all the benefits of a stock turbo. 

Benefits of a stock turbo:

• Quick Spooling 
• Clean installation
• Reliable
• Serviceable by any dealer or reputable shop
• Requires no custom fabrication

However, they do lack peak power, and peak power matters!  When looking for which upgraded unit to replace the stock turbo, we recommend matching the replacement as close as possible to the desired power level to minimize compromising drive-ability.  Any extra capacity you buy in peak for performance will cost you low end response.  Example: Looking to make 650rwhp? Buy a turbo that can just barely squeak out 650rwhp, do not buy something that's good for 850rwhp because it will drive poorly a light load. 

INTRODUCTION:

Many customers have upgraded from their old pre-emissions Duramax to a new LML Duramax and found there are a few changes besides just the looks. 

The new LML made and astonishing 395 RWHP and 731 ft/lbs of torque on our dyno when tested stock. Which is impressive by itself but you will probably notice your old Duramax feels quicker. In fact we hear many stories of guys trying to merge into traffic or gun it to get in front of someone and the pedal does not seem to respond. This phenomena is often called the LML "Dead Pedal". The "Dead Pedal" is a delay the driver feels between pressing on the throttle pedal and the truck reacting as desired. 

But what causes the LML Dead Pedal? And more importantly, What is the fix for the LML Dead Pedal?

These are exactly the questions we hope to answer for you. Below you will see what we have put together on the topic. 

• LISTEN TO THE DIESEL PERFORMANCE PODCAST ON LML DEAD PEDAL
• READ ABOUT LML REGEN
• WATCH A REVIEW OF THE 2.8L 4cyl DURAMAX TUNING