Diesel Tuner's Blog

Shift Up, Throttle Back, What is it?

Many farmers run their large 4WD tractors while performing tillage work. Generally they find a gear that lets them achieve a desired ground speed and run at WOT. This practice will get the job done, no question. However, operators may see the Gallons Per Hour go up while this work is performed. This is a result of the tractor running more RPM than neccessary for the drawbar requirement. The amount of power needed for most drabar activities is probably not the peak power output of the tractor. This excessive RPM operation is the root cause of wasted fuel.  Good news though: Iowa State University, University Extension studied the "Shift Up, Throttle Back" strategy and have given suggestions on how to save fuel.  In fact, during testing some tractors measured up to a 20% reduction in fuel useage.

• ISU Shift Up, Throttle Back Article
• Mark Hana (Co-Author)
• Dana Schweitzer (Co-Author)

REGEN is the burning of soot built up in a DPF. 

 The Emissions Equipment for diesel trucks has changed quite a bit through out the years. In 2004.5 all heavy duty diesel pickups had to install EGR's which is the exhaust gas recirculation system. Basically it turns exhaust into inert gas and directs the gas back into the combustion process. Then in 2007.5 the EPA required pickups to use a DPF. The DPF, or Diesel Particulate Filter, is a filter that catches soot, or unburnt fuel from the exhaust. Once the soot builds up, the exhaust heats up to burn the soot off. Starting in 2011 Diesel Exhaust Fluid is used to treat NOx emissions, in addition to the EGR and DPF treating the carbon emissions. 

The DPF is a crucile part of treating diesel emissions and each OEM utilizes and operates their DPF a little differently. Below, the DPF in the 2011-2016 LML Duramax is explained.

 CHECK OUT THESE OTHER LINKS ABOUT REGEN AND DPF's

• Duramax Thread about Regen Data
• DieselNet Tech Guide to DPF
• How Diesel Particulate Filters Work (JLM Lubricants)

Did you know there is no reason to delete the emissions from your 2011-2016 Duramax? 

DuramaxTuner.com's SPADE is capable of adding up to 135HP to your EMISSIONS INTACT LML. 

Actually, more and more people are tuning their 2011 + Duramax (LML) with the emissions equipment intact.  This is a great option for Duramax owners that would like a nice, quiet, reliable, efficient truck that performs well every time. However, many LML Owners have some basic questions prior to pursining emissions intact tuning. 

3 SIMPLE THINGS YOU CAN DO TO HELP KEEP YOUR LML DURAMAX RELIABLE:

Your truck is generally one of the largest investments you will make, so keeping it on the road is priority number 1!

The LML Duramax is one of the best trucks GM has ever produced. With 397 Horse Power and 796 ft/lbs of torque from the factory, the truck has the power plant necessary to do just about any job you can throw at it. However, despite the massive improvements the LML has brought to the table, there are some all too common pitfalls that can make this beast a burden. 

Here are some other places you can read more about the LML Duramax:

• LML Duramax SPADE
• Truck Trend Review of LML Duramax

Tuning your 2010-2015 Cummins can dramatically improve your driving experience!

The Dodge/Ram/Cummins manufacturers have improved many factors that impact your driving experience throughout the years. From cup holders and radios and interior cab lights to heated seats, larger mirrors and automated turbine braking; Cummins trucks are getting better every year. Horsepower and Torque have not been missed in these constantly ongoing improvements. Back in in 1989 the first 12v had just a 160 RWHP rating from the factory, now the 6.7L as off 2010 is 350 - 370 Horsepower depending on transmission and trim package. With that being stated, there is still a lot of room for aftermarket tuning to improve your truck. 

Below are 7 things you shoud know, before you decide which tuning is right for you . .  . .