This article will walk you through the procedure required to clear DTCs (Diagnostic Trouble Codes) with your EFILive AutoCal or SPADE programming tool.  

Trucks that this procedure is applicable for:

• 2001 - 2016 GM HD Pickup Trucks
• 2006 - 2018 RAM HD Pickup Trucks
• Other EFiLive Supported Vehicles

If you do not have an AutoCal or SPADE and need one, visit our website: https://duramaxtuner.com

Clearing Trouble Codes

Used to clear check engine, or other dashboard lights.

This is a very basic task and can be done by anyone. Items needed: SPADE or Flashscan, and OBD2 cable

1. Turn your key in the “On” position (Not Running)
2. Plug your SPADE into your OBD2 port
3. Scroll down to the Trouble Code option and press OK
4. Scroll down to Clear DTC’s and press OK
5. Press OK when you are asked if you are sure

Visit our Knowledge Base for more helpful articles and procedures.