Get SMART!

What are SMART Files? System Monitoring and Active Responsible Tuning.  That’s right, our calibrations not only add power they also monitor your engines’ activity and adjust appropriately to KEEP YOU SAFE. 

This cutting edge technology has been applied to all of DuramaxTuner.com and Calibrated Power Solutions tuning calibrations.  Developed from factory style algorithms and utilizing OEM sensors, this standard gives tuning customers the power they want and peace of mind they need to upgrade their vehicle.

SMART files available for:

• 2001 - 2020 6.6L Duramax
• 2016 - 2019 2.8L Duramax
• 1998.5 - 2007 5.9L Cummins
• 2007.5 - 2018 6.7L Cummins
• 2013 - 2019 6.7L Power Stroke
• 2018 - 2019 3.0L Power Stroke
• 2011 - 2020 3.5L EcoBoost
• 2015 - 2020 2.7L EcoBoost

2.8L Duramax Tuning/Spade Instructions

We have streamlined the 2.8L Tuning Process! Tunes are now sent pre-loaded. HOWEVER, TO INSURE YOUR VEHICLE CAN BE PUT BACK TO STOCK YOU MUST READ YOUR STOCK FILES BEFORE FLASH. 

There are a few circumstances when you will need to relearn your Vehicle Anti-Theft System (VATS) relearn.  This process is also known as resetting your Passlock or Passkey VATS system.  While the Passlock and Passkey systems are slightly different than VATS the trouble shooting them is fairly similar.  We suggest doing your research or have your truck professionally diagnosed prior to you begin this process.  

Possible trouble codes

• B2947: SHORT TO GROUND ON THE PASSLOCK SENSOR POWER CIRCUIT
• B2948: SECURITY SENSOR SIGNAL CIRCUIT VOLTAGE HIGH
• B2957: SECURITY SENSOR SIGNAL CIRCUIT VOLTAGE LOW
• B2958: BCM SIGNAL INPUT VOLTAGE HIGH
• B2960: BCM READING A VALID BUT DIFFERENT CODE VALUE THAN PREVIOUSLY LEARNED
• B3031: BCM IS IN LEARN MODE BUT DOES NOT SEE A VALID PASSLOCK™ SENSOR CODE
• B3033: PASSLOCK™ TAMPER
• P1626: LOSS OF THE STATE OF HEALTH
• P1630: THEFT DETERRENT PASSWORD LEARN MODE
• P1631: INCORRECT PASSWORD FROM THE VTD SYSTEM
• P1632: UNDECIDED PASSWORD SENT FROM BCM

READ MORE ARTICLES ON OUR KNOWLEDGE BASE

This "How To" article will walk you through installing the EFILive CSP Switch on your 2006 - 2009 Cummins powered Ram 2500 or 3500 pickup truck. 

CSP Switching has been around for quite a few years.  The programming provided via EFILive allows your engine computer (PCM) store 5 separate tune files and the CSP switch can rotate through them.  

NEED CUMMINS TUNING

This article will walk you through the procedure required to clear DTCs (Diagnostic Trouble Codes) with your EFILive AutoCal or SPADE programming tool.  

Trucks that this procedure is applicable for:

• 2001 - 2016 GM HD Pickup Trucks
• 2006 - 2018 RAM HD Pickup Trucks
• Other EFiLive Supported Vehicles

If you do not have an AutoCal or SPADE and need one, visit our website: https://duramaxtuner.com

What is "Cost Per Horsepower"?

Cost Per Horsepower is a simple way to display and measure the cost-effectiveness of automotive performance upgrades.

In practice, this term is probably more often used to prove someone has wasted money on a specific upgrade or the purchase of an entire vehicle.  For the purpose of this article, we are going to assume the vehicle in question is either a Duramax, Cummins, or Power Stroke diesel truck.  

520 RWHP TUNE ONLY LML DURAMAX:

The 2011 - 2016 LML Duramax came rated at 395 horsepower and 765 ft/lbs of torque.  That seemed like an amazing amount of power when this model was first released but these days it is dwarfed by the available power of brand new trucks.

Furthermore, that whopping 395 HP is a peak power rating, meaning that you probably won't produce that much power during normal operations.  In fact, many owners complain that the power delivery of the stock tune is too soft. This is why custom tuning is so important for the LML Duramax.  

Here are some of the things tuning your LML can help with:

• Increased Peak Horse Power
• Improved Shift Quality
• LML Dead Pedal Resolution

The 6.7L Ford in its factory trim represents a significant improvement in technology over the previous generations of the Powerstroke.  Coupled with the 6R140 transmission, this power train a lot of offer in reliability, drive-ability and performance.  Over the past year, we at CPS have worked with our customers and in-house on our own test trucks to develop and test tuning for this platform.  After hundreds of revisions, we're happy to announce we have a product that significantly outperforms the factory 6.7L/6R140 calibration in power and drive-ability, while maintaining factory operation and service intervals of the emissions control system.

Ever wonder what you need to push your stock truck to its limit?  We know the answer, and we created this article for you.  For 600-640 RWHP you will need to keep in mind all the supporting modifications you need to maintain reliability.   

Custom tuning is going to ask your truck to perform at a higher level.  The same goes for upgrading your turbo, transmission, fuel system or any other performance orientate component.  The best way to maintain a moderate level of reliability while upgrading is to address these issues once and do it right!

Here is the list of what you need to make a reliable 600+ RWHP LML with a DPF still on it:

• EZ Lynk AutoAgent 2.0 w/ Support Pack & LSP5 Switch
• LML Stealth 64 Turbo
• 10mm Cp4 Exergy Stroker Pump
• DT550 Built Transmission
• S&B Intake
• Tie Rod Sleeves
• Traction Bars
• Fass 165 Lift Pump
• Beans Fuel Tank Sump Kit
• Edge Insight CTS2 Monitor
• EGT Probe

2017 & 2018 L5P Duramax Tuning Updates:

You're reading this because you're interested in L5P tuning. We know you have been waiting for details and we are doing our best to keep you in the loop with factual information. 

(BTW, we released this info yesterday 9/17/18 to those on our L5P Tuning Wait List.  Join the wait list by clicking the link below and submitting the short form.)

There is going to be a lot of hype in the coming weeks about L5P tuning.  People want to know what are the benefits, costs, process and every other detail about this new tuning product.